Jump to content
Thomasbe

Dynamic object move with feedback

Recommended Posts

Im looking for a way to show the physical location of the valve from a feedback signal. Is there an "easy" way to do this without making 100 pictures for scaling 0-100% ? This would be like the Circular Gauge just with the position of the valve instead. Is this something other people are interested in so it could be added in the unilogic software (if so it needs to be dynamic so you can enter the specs of the valve)?

image.png.aa9476823311425f5cf75a718e6a79fb.png

Share this post


Link to post
Share on other sites

I use only two symbols to build a valve being either light or dark (red or green) whatever you like

then dynamicaly activate to show as on or off.

By aranging several of these (like a clover leaf) you can easily make all the various valve types,

 one way, two way, 3 way etc.

 

3wayvalve.jpg

  • Like 1

Share this post


Link to post
Share on other sites

This is how it was originally, BUT the customer wanted something more fancy so ....... Im guessing making 100 pictures ranging for 0-100% isnt really ideal for the unistream 15.6 to handle when its multiple 3 way valves (its 4 of them)? Is there no good way of setting this up?

Share this post


Link to post
Share on other sites

Fancy... I know Unistream can handle a lot of images. I like to push the HMI to the limits and so far Unistream is doing great. In your case you need a nice 3/3 valve. You need a list of 3 images variable to show the actual position.

Screen1 - 2018-8-7_19-34-29.png

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...