Program simulation without PLC online

[camillende]

Hello to you. I am really new on unitronics unilogic. I would like to know if it is possible to unilogic to simulate the operation of a written program without the presence of an online controller. if so how to do it? thank you in advance.

[ORSO2001]

Hi camillende,

that I know is not possible; let me say that also if could be possible I still prefere check the program with a real PLC and I/O modules...in this way you will have not surprise during the real installation.

Let me add that the unistream software is free...other brands don't share free software and you have to pay for this...the cost of a unitronics PLC+HMI+I/O modules is less than the cost of other software...

this is what I done when I started to learn how a PLC works (checked what the markert offer as PLCs and for each PLC what was available) ... I found Unitronics that has free software, great forum, excellent service support (I tried this after)...and to be honest I still be sadisfied...I still have on my desk the first PLC that I bought (is become one of the family)...and every job that I done, when installed at customer site, had has no surprise for me.

Said this...can I have an extra discount !? 😀

[camillende]

OK thanks ORSO2001 for the answer to the question.
if I understood correctly, one only tests a program elaborated on unilogic with a connected controller.

[ORSO2001]

hi camillende,

yes...that I know is the only way.