Jump to content
marcelo_chaura

error de comunicacion

Recommended Posts

hola ,estoy intentando realizar comunicación entre PC-PLC al seleccionar esa opción de comunicación me da el siguiente cuadro (foto 3) donde configuro la ip correspondiente y me arroja es triangulo amarillo que dice que debo actualizar mi plc.

Después, al cargar mi programación hecha en el function 1 , , voy a download y después full download y dice verificando conection y me aparece el cuadro de la foto 1 y si selecciono la opción copy to usb stick me da el cuadro de la foto 2.

Alguna solución al respecto? 

GRACIAS

 

hello, I'm trying to make communication between PC-PLC when selecting that communication option gives me the following table (photo 3) where I set the corresponding ip and throws me is yellow triangle that says I must update my plc.

Then, when loading my programming made in function 1, I'll download and then full download and it says verifying conection and I see the picture in photo 1 and if I select the option copy to usb stick it gives me the picture in photo 2 .

Any solution to this?

THANK YOU

50006579_521424371703697_7730235933529735168_n.jpg

49351311_330449094235048_8742131014446350336_n.jpg

49732788_324911261445421_578310800876240896_n.jpg

Share this post


Link to post
Share on other sites

This is telling you to update the firmware on your PLC. To do that, insert a USB thumb drive that is formatted to FAT32 in your PC and let UniLogic download the new firmware to it. When it is downloaded, insert the USB drive into the PLC and perform the update. When that is complete you will be able to download your project.

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...