GonzaloRoldan_ 2 Report post Posted February 13 Hi everyone! I'm developing a project with UniLogic v1.25.61 for the UniStream USP-104-B10. Everything's working well, but I made some changes in some buttons and fixed texts of the WebServer and when I download the project to the PLC and surf in the WebServer, the texts are not updated but everything else is refreshed. I've tried Full Download, but it's not working. I also try surfing in the WebServer from a new PC, but it's the same. Have anyone experience this before? It's quite strange because all the other functions of the WebServer are updated, but not the texts! Thanks in advance, Gonzalo Quote Share this post Link to post Share on other sites
Pista 4 Report post Posted February 14 Hello GonzaloRoldan, I had such a problem. If you have a language other than default English, so the description of the buttons does not transfer to the web page. You need to switch default English language to active and make changes. Then donload to PLC. It seems to me that the description of buttons in other languages is not conveyed to the webserver. Ahoj. 1 Quote Share this post Link to post Share on other sites
GonzaloRoldan_ 2 Report post Posted February 21 Hi @Pista , That was the solution. Thank you very much! I've just changed the language and it started working. And I agree completely with this line (despite I don't understand why it's like that): On 2/14/2019 at 10:01 AM, Pista said: the description of buttons in other languages is not conveyed to the webserver. Cheers, Gonzalo Quote Share this post Link to post Share on other sites