Jump to content

Recommended Posts

V350-35-TU24 is not a valid model number.  Is it possibly a V350-35-TA24?

If it is a -TA24, you'll want to use either output 0 or 1 in step control mode for the pulse inputs on your stepper.  Also note that this model is limited to a 500 Hz output, which  may not be fast enough for your application.

Joe T.

Share this post


Link to post
Share on other sites

Hello cyrillic friend,

If you want to go faster you need model V350-J-TR34. You could use separate 5V supply for fast outputs if you want to evade the use of resistors.

Share this post


Link to post
Share on other sites

Hi. 

I need help with of step motor. My machine use two step motors synchronized but in opposite directions.  Will  i get power two drivers in a HSO?

What solution is more easy?

 

Share this post


Link to post
Share on other sites
19 hours ago, Heitor said:

I need help with of step motor. My machine use two step motors synchronized but in opposite directions.  Will  i get power two drivers in a HSO?

Needs little more info.

Which controller are you using and how are you commanding the drives? You can see in the help files possible configurations of high speed channels - https://unitronicsplc.com/Download/SoftwareHelp/VisiLogic_Knowledgebase/PTO_Functions__Simple_Motion_Control.htm

What do you mean by synchronized motors, are you cutting circles or something similar? If you need interpolation there are no PTO functions for two axis movement, you'll have to write logic yourself.

Share this post


Link to post
Share on other sites

My process is a revestiment but the product need is  moving. I need use two motors, in a witch far end in oposite directions.

Share this post


Link to post
Share on other sites

So, if I understand this, you have two axis linearly moving from one end to the other. You can use models TR34 or TRA22 and have two channels configured as " Pulse + Direction ", also look at the manual of your driver for steppers. I hope this is enough to get you started working on the details.

Check  out POT webinar on Unitronic's YouTube page, great stuff.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...