Jump to content

Recommended Posts

So on the V700, whenever a numeric keypad is pulled up, I have to touch the top half of the button to get it to register. this can be kind of frustrating, because the buttons are long and narrow and it usually takes a couple tries to get it to work. I know its a software issue because there's a border that surrounds the touchable area when the button is pressed and it only covers about 60% of the button. when the button is pressed in the center, it does not register. 

unitronics issue.jpg

Share this post


Link to post
Share on other sites

Yes I did. It would be one thing if it happened once but this is consistent and repeatable across every V700 I've used, and the other keyboards work fine. This isn't a gamebreaker, per se, because it functions fine, but it's annoying, and it's a regular complaint from our users.

Share this post


Link to post
Share on other sites
8 minutes ago, benS said:

this is consistent and repeatable across every V700 I've used

Not sure what is going on here, but I have used dozens of V700s and have never encountered this problem.

Share this post


Link to post
Share on other sites
On 4/8/2019 at 4:25 PM, benS said:

I know its a software issue because there's a border that surrounds the touchable area when the button is pressed and it only covers about 60% of the button. when the button is pressed in the center, it does not register. 

I do see the issue of the border not surrounding the entire button (it's closer to 80%), and I'd like to see Unitronics address that, but have never had a problem with a keypress being difficult.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...