Jump to content
Drozerce

Sintax for Timers from Intouch to VisiLogic

Recommended Posts

Hi to all,

can anyone help me please...

I have Intouch SCADA and Unitronics PLC. I want to create timers on the SCADA, and the same timers to transfer to the software in the PLC. FOr example, as I'm doing for Memory variables and Inputs and Outputs (in Item Name in Intouch I write:iMIxxx, iOIxxx, where xxx is the numer of the variable).

Know I want to do the same also for the timer (for example in the SCADA iTD35 should be the same timer in the plc TD35). But the sintax is not corect and the OPCLink gives me an error. 

Does anyone knows, how can I do this? What is the correct sintax for timers from Intouch to Unitronics?

Sintax timer.jpg

Share this post


Link to post
Share on other sites

Look in the Help for the Slave Address definition table.  Timer presets start at C000 hex, and timer currents start at D000 hex and are 32 bit words.  For T35 preset, try address hex C023 (decimal 49187).

Joe T.

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...