Jump to content

Recommended Posts

Hello,

I have a V1210 which defaults to 127.0.0.1 ip address on power cycle. The project settings ip is 192.168.1.4 and the ip in the card init block is 192.168.1.4. I've tried downloading using serial connection to make the parameters stick, but nothing seems to work. Anyone have ideas?

Regards,

Justin

Share this post


Link to post
Share on other sites

Can you post a copy of the program??

Is the IP set from directly or indirectly (from MI's)in the ladder??

Any chance that the battery needs to be changed??

Share this post


Link to post
Share on other sites

We need to see your program in order to offer any help. At the very least we'll need to see a screen capture of the relevant ladder rung with the Ethernet Card Initialization FB and with it opened up to see the details.

FYI - the project settings in VisiLogic have no effect on the PLC.

Share this post


Link to post
Share on other sites

+1 to both Cam & Flex's suggestions, especially Flex's FYI.  IP setting is not obvious at first in Help...you might be thinking as Flex says.  Use the Search tab in Help to find TCP\IP: Socket Init and other mentions. These will steer you in the right direction to having the socket set in your program.

cheers, Aus

Share this post


Link to post
Share on other sites

Hi,

It is not recommended to use power-up IP configuration (without Ladder configuration). It may be wrong for many reasons.

Preferred to set configuration from Ladder. This will warrant right configuration.

By the way, in PLC Tools & Applications there is support for DHCP for Enhanced Vision  controllers.

https://unitronicsplc.com/support-tools-and-applications/

http://unitronicsplc.com/wp-content/uploads/2015/12/V570_DHCP.zip

 

When you look for solutions, please visit and search not only in Forum topics, but in Unitronics Help Center Articles too.
Link:
https://support.unitronics.com/
There are many available articles.
If you have solution to share, tell us know and we will add it to Articles.
B.R.
 

 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...