Jump to content
lorddoskias

GPRS GSM communication

Recommended Posts

Hello,

I'm using an enfora 1308 GPRS modem and Vision 280 PLC I am able to connect the PLC to the PC using the GPRS connection through RemoteAccess software from unitronics (The pc is in listening mode) but whenever I try to query the PLC for example get the current system software version I get a " Run-time error 13: Type Mismatch" and the program crashes. I have tried this from Visilogic with the same result. I can confirm this behavior with both Visilogic 8.0.1 and the latest 9.2.0 version. Any help would be greatly appreciated.

Share this post


Link to post
Share on other sites

Which versions of VisiLogic and RA you're using?

As I have stated I tried this with VisiLogic 8.0.1 and the latest one VisiLogic 9.2.0 and RA installed from the respective VisiLogic packages.

Share this post


Link to post
Share on other sites

I am using an enfora 1308 modem and a V1040 monitor. I have set up the sms option successfully. The sms are received to selective mobile phones successfully.

The problem is that since the alarm condition trigger the sms send command sms are sending to the selective mobile phones continuously until the alarm condition be restored.

Unfortunately I have only remote access to the project.

I know that this is a code problem but if anybody have an idea about this I will appreciated

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...