Jump to content
Sign in to follow this  
ORSO2001

Unable to read DTI row

Recommended Posts

Dear All,

I am doing as follow: import a CSV file (copied from USB stick in the "data folder") with a single row of 23 Strings (each String is 25 lenght); create a UDTF file from this CSV; upload the UDTF to a DTI; read the DTI row.

each of these action is done in a specific ladder rung; each rung check if the previously action was perfomed without problem...then at the end my CSV is converted; the DTI il filled with right values but when I read the DTI row I don't have any error (exist status "0") but the struct variables is not filled (all single field is empty)...I tried to write the DTI with the same struct and all works...the DTI take the new value...I forced the action (cvs->udtf->dti->read) then the DTI take the value of the CSV file but nothing change...the struct fields still have the previusly values.

what can be wrong?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...