Jump to content
Sign in to follow this  
dardo

Binary image doesn't refresh on Web Server.

Recommended Posts

Hi, I have a Problem with a binary image in an Unistream USP-070-B10 Web Server. This image doesn't update when there is a bit change . 

I have many other binary images that are working well.

Thanks in advance.

Share this post


Link to post
Share on other sites

I take it you have two images, one for state 0 and another for state 1, correct?

 

Swap the logic and see if the image comes up correctly.

Then swap the images and see if it works.

That's where I'd start.

Share this post


Link to post
Share on other sites

Does the problem reproduces if you download the project to a different PLC?

If so, send the project to Unitronics support with the instructions on which page and which image, so they can try to reproduce it here, and if it does then it will be forwarded to the R&D.

 

What version of UniLogic are you using?

Share this post


Link to post
Share on other sites

The same is happening to me. I've already tried in 2 differents PLCs.

If I refresh the webpage, the image also refresh. But if I just clicked on it, it stay with the same image.

I'm developing a project with UniLogic v1.25.61 for the UniStream USP-104-B10. 

Thanks!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...