Jump to content
Rog

AI8 Module

Recommended Posts

We been having issues this modules. Work for sometime. Then all sudden the module fails. Reading from the input starts to jump all over the place. It turns out one the inputs causes it. Removed the input. We have this set up to read from the source. Is there something causing this fail. We have replaced bunch of the AI8. Never have issues with AI4 modules.

Thanks

Share this post


Link to post
Share on other sites

Try shifting the AI4 connections onto the newly installed AI8 ones, and see what happens.  If it turns out the 4s then blow, and the changed around 8s don't, it must be something in that area of the wiring giving rise to conditions that the module doesn't like.

I'd also arrange for the failed 8s to go back to the Creators for them to check out the failure(s).  This might also point you in the right direction, or discover something more fundamental.

cheers, Aus

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...