Jump to content

Recommended Posts

Hello, I have a project connecting some new I/O to a vision 350 through an EX-RC1. The Vision 350 will then transfer some of the data to a Vision 1040 PLC. In the project it will be a EX-RC1 -> IO-AI4-AO2 ->IO-DI16 on one den rail in a panel. I believe all I need is some devicenet cables to connect the EX-RC1 -> Vision350 PLC -> Vision1040 to communicate through CANbus. Would there be any other hardware or items required besides power wires and the programming cable for the 1040 and 350?

Share this post


Link to post
Share on other sites

The distance I believe is within the 1000 meter limit of the EX-RC1.  The project distance is unknown at the moment though. In the case that it is over would I use another EX-RC1 to boost the signal to the PLC?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...