Jump to content

Recommended Posts

Translation:

Quote

Fatal errors will occur every year after using this device.Approximately every 2 to 3 months
This device is not connected to VFD and is used by 220V via transformer DC24V

 

Share this post


Link to post
Share on other sites

Hi,

Open project in the same VisiLogic you used to download project to PLC.

在用于将项目下载到PLC的同一VisiLogic中打开项目。
Change to Ladder.
更改为梯形图。
Open "Edit->Find Subroutine by Ladder Error Code"
打开“编辑->通过梯形图错误代码查找子例程”
Enter code 17 and click OK.
输入代码17,然后单击确定。
VisiLogic will show you subroutine where error being registered.
VisiLogic将向您显示在其中注册错误的子例程。
VisiLogic will say "Subroutine not found".
VisiLogic将说“找不到子例程”。
Error may be as result of EMI. Then you have to find where the EMI coming frpom.
错误可能是EMI的结果。 然后,您必须找到EMI从何处来。
GOOGLE TRANSLATOR USED
 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...