Jump to content
Sign in to follow this  
JMVittone

Unilogic Panel IP Address Question

Recommended Posts

I am trying to be able to set the Panel IP address of my US7-B10-RA28 via a ladder instruction. I want to store the IP address in a variable and load it upon startup.

 I can see in the "System.General" structs that there is a "Panel IP Address UINT32",  but I cannot write to it with a store instruction.

Any help is greatly appreciated!! Thank you.....

JMV

Share this post


Link to post
Share on other sites

Personally, I would use the IP Settings Edit HMI elements under Numeric Elements in the HMI builder. You can set CPU/Panel IP & DNS Settings by using the element 3 times and changing its configuration in the properties window.

I believe you can also set the IP in UniApps.

I don't believe the UniLogic provides a means to programatically change the IP Address of the unit. They don't even have a DHCP client built in AFAIK.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...