Jump to content

Recommended Posts

Hi 

I have an issue. Please help me!

I want to replace my damaged vision v1040. I could upload current program from old vision. When I downloaded to new vision then started OPLC , many alarms display and the system operation could not start well. 

I think it may be caused by the setting values in old vision could not transfer to new vision. I choose "Download All & Burn". 

If you have any idea or solution, please let me know.

Thank you so much for reading.

Share this post


Link to post
Share on other sites

It seems you have some misunderstanding of how your PLC and VisiLogic operates. The program uploaded or downloaded with VisiLogic does not contain operand values. However, there is a facility to do that. Go to Connection/Export PLC Operands (to text or binary file) while connected to the old PLC. After that completes, do the reverse with the new PLC.

You can also do something similar with an SD card, but the PLC program must be set up to allow that.

  • Like 1

Share this post


Link to post
Share on other sites

You must use Export PLC operand to txt  (or bin) and upload all operand from old PLC battery backed RAM.

Then import it to new PLC.

You also must upload data tables from old panel if it present in project.

Then download it to the new one.

 

P.S.

1) Please check all jampers on motherboard and snap in boards befor replace.

2) I do not recommend this for you application, But sometimes i must replace new "motherboard" in new PLC for old one.

This is useful when some hardware + software lock is present in program or upload project is not possible.

If hardware inside PLC is the same and all connector is the same - this solution is useful when display and touch sensor is damaged.

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...