Jump to content
Renier

Unistream SD card problems

Recommended Posts

Hi, I am using the 7" unistream and i have data samplers running and writing to the SD card. I first noticed that nothing is displayed on my trend and on further investigation I found the data sampler's status (in its own struct) to be "-3" which is listed as a "save file eror". I then tried to save a screen shot and it also failed. Strange thing is, i can still browse the SD card using uniapps.

When i remove the sd card and insert it again with the plc running, it works fine. But when the plc is shut down and starts up again, it has the same problem.

Does anyone have an idea as to what's going on or what i am doing wrong
Thanks

Share this post


Link to post
Share on other sites

When I have issues with the SD card I just replace the SD card, not saying that's your issue but a lot of SD cards now are crap out of the box or shortly after. 

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...