Jump to content
Kevin L

Actuator interface

Recommended Posts

I'm using a USP 10.4, and i'd like to add a module to control the position of linear actuators

The Hall sensors in the actuators are 0-5V, and the count frequency will be high, as there are dozens of pulses per millimetre of travel

Any thoughts on which module to use?

 

Share this post


Link to post
Share on other sites

We need a little more information on the actuators, but I'm guessing they have quadrature feedback.

I'd go with UID-0808THS modules which will handle two actuators each.  You'll need to convert the 5V to 24V - Google up "5v to 24v opto isolator".  

Let us know what you find.

Joe T. 

Share this post


Link to post
Share on other sites

The actuators are indeed quadrature feedback

You've reinforced my thinking the UID-0808THS module is the one

I purchased a few of the opto isolator converters from the link below, initial bench testing is promising

Just need to work out how to write the subroutine now - every day's a school day!

https://www.amazon.com/Converter-Optocoupler-Isolator-Maluokasa-DST-1R4P-N/dp/B07NNLYWCB

Thanks for your help again Joe

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...