Jump to content
Sign in to follow this  
Pater pierre

incompatible configuration - expansion error

Recommended Posts

I'm running a V570 with expansion modules : Ex-A1 with 5x IO-DI8-TO8 and 1x IO-AI4-AO2; I recently added 2x IO-D16A3-TO16. Now the PLC gives very frequently an expansion error. When this occurs, PLC gives the black text screen, the 2 new modules get a flashing green run led, the older modules remain running (fixed green led). Never had problems before unless with these new modules. I even disconected all IOs from the new modules, but it keeps going from time to time into expansion error.

Are there incompatibilities known with this configuration? Is there a way to manipulate the conditions that cause the error (change SB's, timers,...?) Suggestions welcome !

Share this post


Link to post
Share on other sites

Just guessing, but you may need to upgrade your EX-A1 to an EX-A2X. I don't know how well the IO-16A3's play with the older module - the creators will have to shed some light on this.

Joe T.

Share this post


Link to post
Share on other sites

Dear Sir,

Please review my comments below and send your feedback to support@unitronics.com :

· How did you install all the I/O's? are they installed in one din rail properly?

· Can you send us any picture of the system which include all the models?

· Sorry to bother you with this question but Please verify that you select the correctmodels in HW.

Cheers,

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...