From Users: VisiLogic applications

17 files

1. RS-485 & Enc inverter

   By NOVI

   Hello
    
   A simple application for connecting a Unitronics PLC V280 &Chinese inverter modell EDS V-300
    
   

   231 downloads

   Submitted June 20, 2020

2. Uni-Can Example

   By NOVI

   Hi to all Unitronics users
   Examples for UniCan with 3 RC EX-1 modules  and DI in  DI out  and AN in and AN out
    
   

   446 downloads

   • ex rc1

   Updated May 26, 2018

3. CanOpen EXAMPLE

   By NOVI

   Hi
   Slightly modified Example for CanOpen protocol for V560
   on-line change of parameters & check IN and OUT
   send and save parameters in NODE
   and set parameters when NODE loses communication and the outputs remain active
   I have not been able to find any help for this problem anywhere and but to make it easier for someone
    
   Best regards  
   

   414 downloads

   • canopen interruption of communication

   Updated June 20, 2018

4. Programa1

   By EdwinCorrecha

   Hola, estoy trabajando en este código de escalera, pero tengo algunos problemas:
    
   1. El display de alarmas no siempre se activa cuando pulso el boton de mostrar las alarmas.
   2. el bit de activación con el disparo de la alarma se activa la primera vez, como tengo solamente la opción de reconocer y no de resetear, al momento de desactivarse desaparece, y cuando se vuelvo a activar la alarma el bit de disparo no se activa.
    
   Alguien podria decirme que estoy haciendo mal?  soy  principiante
    
   gracias
   

   361 downloads

   Submitted September 17, 2017

5. Modbus Client and Server over GPRS

   By s.pratt

   Example for remote Modbus communications over a GSM cellular modem.
   

   751 downloads

   Submitted December 2, 2015

6. Oil and Water Dual tank level indication program

   By Walkerok

   This program shows a way to indicate two liquis levels in a single tank. Since you can not overlay two bar graphs on top of each other this is a work arround to be able two show two seperated fluids in the same space. Oil and Water in this case.
   

   770 downloads

   Submitted September 27, 2015

7. Pump PID Example Using V570 and E6B

   By Walkerok

   PID loop calculations showing on screen entry of variables for a fluid pump that can be set to control from either the suction side of the pump or the discharge side of the pump with Auto tune button added to the entry screen.
   

   1,346 downloads

   Updated December 3, 2017

8. Cumulating Timer

   By s.pratt

   Timer that accumulates the amount of time a condition is running.
   

   649 downloads

   Submitted July 9, 2014

9. pH subroutine

   By Memphis

   pH control subroutine
   

   854 downloads

   Submitted February 25, 2014

10. UA24 - Bits to Numeric + Linearization

    By Jas

    The program takes the status of I0 to I7, and changes the status of the respective bits in MI 1.
    Bits in the target register that are outside of the defined range are not affected.
    The value in MI 1 (8-bit) is then linearized to 12-bit for the analog output.
    

    258 downloads

    Submitted January 3, 2011

11. Network tools

    By Guest

    Some examples for network tools: Ping, RFC-1305, DHCP.
    Code was written in Visilogic 8.0.1
    Any comments are welcome.
    Thanks in advance.
    

    971 downloads

    Updated September 2, 2010

12. UniCAN Examples

    By Guest

    These are some UniCAN examples for newbies. Real simple, just to set up the basics.
    The Master and Slave notation is arbitrary from the UniCAN point of view, but useful for clarity of explanation.
    Set up for V350/V570
    

    1,310 downloads

    Submitted September 1, 2010

13. 2-Minute Timer

    By Guest

    2-minute timer for a more productive working environment. If the current task can't be completed in 2 minutes or less then place in a trusted, regularly updated system of lists.
    

    794 downloads

    Updated August 16, 2010

14. SD Write Delimited Line

    By Guest

    Example based on Unitronics SD Card Demo example, but only to demonstrate Writing a delimited line to SD. Added some additional controls for stopping and starting, resetting counter.
    

    344 downloads

    Submitted August 6, 2010

15. IO-AI1X-AO3X Enable

    By Guest

    File to enable expansion module IO-AI1X-AO3X in VisiLogic. Extract and run
    

    295 downloads

    Submitted July 1, 2010

16. V570 Alarms Example.

    By Guest

    V570 Alarms Example- how to.
    

    1,983 downloads

    Submitted June 27, 2010

17. V570 Trends SD Example

    By Guest

    This sample application shows the Trends capabilities of Vision Color Display controllers.
    
    
    

    783 downloads

    Updated June 27, 2010