Jump to content

R.Mozes

Members
  • Content Count

    178
  • Joined

  • Last visited

  • Days Won

    8

R.Mozes last won the day on September 18 2019

R.Mozes had the most liked content!

Community Reputation

12 Good

About R.Mozes

  • Rank
    Unitronics Support Guru

Profile Information

  • Gender
    Not Telling

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Hi Juan, Following Ofir's questions above, can you please also update us the PLC's serial number? Please reply to support@unitronics.com Waiting for your updates. Thanks.
  2. Hi, The live update is already fixed in version V9.7.9. but any way check if he need to use Proxy or Internet Explorer download setting (see the image below). I hope it helps.
  3. Hello, Yes i familiar with cheap camera that works with UniStream: The camera model for the demo case is ELP-IP1881. Websites: www.elpcctv.com I hope it helps.
  4. Hi Please try to recover this issue as follow: · Download a blank project to your PLC by using COM port RS232 115200 baud rate. · Initialize and reset the PLC (all value will be cleared) · Open the original project · Restore system images (see below how to..) · Perform build-all from Build menu · Download all & burn the project to the PLC (again by using COM port RS232 115200 baud rate) I hope it helps.
  5. Hi, First, please make sure that the bus connector is properly attached to the CPU. If it does, Can you try to add another unit before this one and try again?
  6. Hello, Please contact support@unitronics.com
  7. Hi, The battery type to all models (except JZ20) is: RENATA BATTERY,COIN,2450,3V,LITHIUM http://www.renata.com/fileadmin/downloads/productsheets/lithium/3V_lithium/CR2450N_v06.pdf Unitronics part number: 160200362 I hope it helps.
  8. Dear Aus, Windows 10 is still new and we didn’t finish all our tests to give an official statement, only what is stated in our System Requirements. We successfully manage to run UniLogic , VisiLogic and U90Ladder under Windows 10.. Please note - JAZZ20 USB port driver currently is not supported by Windows 10. How to Disable Driver Signature Verification on 64-Bit Windows 8.1 or 10 To disable driver signature verification, we’re going to need to get into the Troubleshooting options from the boot manager. The easiest way to bring this screen up is using a secret trick. Simply select
  9. Hello, Note that you can always go to our web site www.unitronics.com and find more information under the support page>technical library. All Unitronics software's & Tools as well the support are FREE of charge. The main software's are U90Ladder , VisiLogic and UniLogic. VisiLogic – for Vision and SAMBA series U90Ladder – for JAZZ/M91 series UniLogic – for UniStream series U90Ladder / VisiLogic / UniLogic software's are available to download from our web site (FREE of charge) at: http://www.unitronics.com/Content.aspx?page=Downloads After installing the desired software go to
  10. Hello, it seems that the project is damaged. please send the project to support@unitronics.com. i hope it helps..
  11. Hello, UniLogic able to support PNG images and VisiLogic doesn't support PNG properly as it converted into a bitmap in Vision PLC. PNG originally can be transparent so UniLogic don't need any dedicated tool. I hope it helps..
  12. Hello, M210/M216/M218 and other controllers from Minicon M2xx series are very old. They was discontinued more than 12 years ago. We don’t support them anymore. We have no controllers in stock and, as most of electronic components were discontinued long time ago, we cannot produce or repair these PLC. I arranged for you some materials according to your request below, You can find the programming software and guides for these controllers at: https://unitronics.exavault.com/share/view/5rqf-5nv0ru29-6g1aovwl Programming cable: The programming communication kit is RJ11 4 wire cable a
  13. Hello, Please update the PLC to the latest system files (BinLib, Boot, O/S) using VisiLogic V9.6.0. Then Download a blank project and perform initializes & reset. If the problem still occur please contact support@unitronics.com for farther treatment. Best Regards, Reuven Mozes
  14. Hello, It seems that indeed the BinLib version cause to this issue. Please try to recover the PLC as follow: Use COM1 RS232 115200 baud rate 2sec time out Connect 6 wire cable instead of the 4 wire cable. Reboot the PLC The PLC should beep > tap once to stop the beeping Go to VisiLogic>communication & O/S, the 4th tab is system modes Check the communication by clicking on the GET button If you have a communication>Switch to Factory BOOT Go to O/S tab>check Download only the BinLib by clicking on the Advance button>BinLib (only) If the download will success, then r
  15. Hi, The link is now fixed: http://www.unitronics.com/data/uploads/software%20utilities/Unitronics_Library.zip
×
×
  • Create New...