Jump to content

thanswijk

Members
  • Posts

    2
  • Joined

  • Last visited

Everything posted by thanswijk

  1. Hi, i'm trying to control a DC fan which needs a 25 kHz control signal. The control line is connected through the NPN output of an EX-D16A3-TO16 expansion module which is connected to a V1210. But one thing isn't clear to me at the moment: The expansion module can send a frequency of 1Hz - 32 kHz. So a MI should be enough for the job. But when I look in the help file under "Configuring a High-speed Output (PWM) > Frequency (F)", it says that the Software Units of a V1210 are 0.1Hz (500Hz = 5,000). This would mean that an MI would not be enough because a value of 32,000 would mean I only send a frequency of 3,200 Hz, instead of 32,000 Hz. I cannot select an other operand than a MI, so can I not use this expansion module for sending out an 25kHz signal to my fan?
  2. Hello all, I have a question about an Ethernet connection. I'm trying to connect multiple V570 PLCs to the existing network. I use the program Arkadi Samarov wrote to assign an IP address through DHCP. I would like to connect to the PLCs by using there Hostnames through a DDNS server, but when checking the DHCP table in my router it seems the PLCs don’t have Hostnames. I can’t seem to find an option to assign this to the PLCs. Is it possible to assign it or should I go with a static IP address. Thanks in advance, thanswijk
×
×
  • Create New...