Jump to content

cataliz3er

Members
 View Profile  See their activity

  • Content Count

    11

  • Joined

  • Last visited

 Content Type 

Everything posted by cataliz3er

  1. cataliz3er
    What type / model of battery is required? I can't seem to find this information in the Technical Specifications or in the Installation Guide. Thanks!
  2. cataliz3er
    Hey guys, I'm using the following piece of code to connect to a Vsision V570 PLC. public void Connect(string ip) { try { var ethernet = new Ethernet(ip, 20257, EthProtocol.TCP, 3, 3000); PLC = PLCFactory.GetPLC(ethernet, 1); PLC.SetExecuter(Unitronics.ComDriver.OperandsExecuterType.ExecuterPartialBinaryMix); Debug.WriteLine($"Connection successfull"); } catch (Exception ex) { throw; } } Most of the ti
  3. cataliz3er
    I have installed a UID-0808R IO module, and the PLC asks me to upgrade the firmware for it. Unfortunately this failed, so I have upgraded the firmware of the panel to 1.9.6. The same message appears: I/O units firmware upgrade failed OS upgrade for I/O unit #0 failed In the "IO Units Upgrade" section: ID: 0 OS File for Upgrade: UID-0808R_V_2_2 Current OS Version: 0.3 Any way to fix this? Thanks
  4. cataliz3er
    The help of the UniLogic software does not have a topic regarding FTP configuration, and I am unable to find relevant documentation on the Unitronics website. Please send me links to, or an attachment of the documentation. Kind regards.
  5. cataliz3er
    Is it possible to use the FTP server in the UNIStream to transfer recipes and logs to and from the PLC? If so, how does one do it?
  6. cataliz3er
    Hello, I noticed that the status messages are similar and managed to implement the PID using the Vision series documentation. Thanks! Don't worry, All's well that ends well... When I get feedback to my little blunders...it's usually smoke
  7. cataliz3er
    I need to edit the recipes on the PC and then send them to the PLC. I'm not sure whether to call it manual or automatic. Reading the recipes is also important because they can be edited on the PLC.
  8. cataliz3er
    Hello! I have not been able to find any documentation regarding the PID functionality in the UniStream series anywhere. I'm interested in details about the parameters of the PID struct. For example, what units are used to specify the Sample Time? 100ms, 1sec, etc. And what are the ranges of the parameters? I'm assuming I can't just enter the full 16bit value. Other useful information would be about the auto-tune procedure. I know it seems intuitive, but without proper instructions one gets the feeling of wandering around poking stuff and saying "i wonder what happens if I do this". Is the
  9. cataliz3er
    Hello, Thanks for the reply! Then I'm guessing there is no way to bulk manipulate Data Tables the way it is possible with the Vision Series. What would be the best way to transfer recipes to and from the PLC in this case (other than SD card)? Thank you!
  10. cataliz3er
    Hello, I have been using the Vision series sucessfully for control and SCADA applications using the .net driver library. I am now looking to try out the new UniStream OPLCs but I'm not sure if the existing driver will work. Is such a thing possible? If so, what are the differences (if any) in the workflow? Thanks
  11. cataliz3er
    Hello, I am using a Vision 570 for monitoring a number of temperatures, and I need a way to log the information. I tried the sample "SD Card: Trend Read/Write/Append" but the problem is that in case of a power outage, I lose the information in the segment. Is there a way to prevent this? I was thinking of saving the temperatures to a data table, but then how do I display it on the trend? If this has already been discussed, my appologies, and please redirect me. Many thanks, Catalin Pop
×
×
  • Create New...