Hello,
I have a V290 that runs an automatic pallet wrapping machine. The issue I'm having is that when I uploaded the program, then dowloaded it to a spare V290, it had corruped data tables, such as timer values and corruped text characters. The software is version 4.06, and hardware rev is 4.00. I tried going up to software version 8.6.3, and hardware rev 5.04, but had issues with the on-screen keyboard not working properly (Example, press a 1 and get a 6, press a 2 and get a 7) so I went back to the older software version and hardware rev. For some reason, I also have a couple of timers that will not time up in run mode either. They are just free running timers that reset themselves with their done bits. I'd like to attach the file, but it is 563KB, and won't compress enough to get under the 500KB limit.
Possibly I'm doing the upload or download incorrectly. What I did was to Connection then Upload on the original V290, and uploaded the program. The verify showed a red X next to the timers. Then I downloaded to the spare, and also wrote all data tables (not sure if this was necessary).
I would appreciate any help.
Thank you.