Jump to content

swb311

Members
 View Profile  See their activity

  • Posts

    8

  • Joined

  • Last visited

 Content Type 

Everything posted by swb311

  1. swb311
    ¿Algún programador de unitronics en jalisco/guadalajara? Necesito varios programadores para empleo a tiempo completo. Las habilidades de desarrollo web completo también serían útiles. Any Unitronics Vision programmers in Guadalajara or greater Jalisco MX area? I would like to find 2-3 devs for a permanent full time position, web dev experience and English skills are a plus.
  2. swb311
    Please forgive my oversimplification of the issue. I've been awake since early Thanksgiving morning trying to get wells back online that were affected by this hack lol.
  3. swb311
    Anyone affected by this hack had port 20256 forwarded to their public IP. It's literally because the programming port is forwarded to the internet, doesn't even really qualify as a hack. If you get hit by this you should fire your networking guy.
  4. swb311
    I have also noticed that the SB's associated with Ethernet state (not relevant for V700). Have these status registers moved?
  5. swb311
    I would also suggest using a #6 "Preset Holding Register" function block instead of the #16 "Preset Holding Registers" function block as your vector length appears to be one. This can cause issue with some slave devices. You might have better luck if you lower your baud rate to mitigate any problems electrical noise (that VFDs are notorious for) might be causing, as well as making sure you are using shielded cable that is grounded on one end only.
  6. swb311
    I would consider remote mounting the PLC and using a tablet to remote control it, either using VNC with the Uni product line or Modbus/TCP with the Vision product line.
  7. swb311
    What benefits have you seen using the application on the mobile device and collecting the data over Modbus/TCP versus just using the webserver on the ethernet card and a browser on the mobile device?
  8. swb311
    It is fairly simple. Connect your sockets, scan on the slave device and poll on the master device. As usual with Modbus, to talk to many devices you will have to convert your MBs to integers using the BIT->INT FB.
×
×
  • Create New...