JHORN

I have noticed this as well. It appears that the as ascii string is always justified to the left. It does make the display look silly. Is this something that will be fixed in newer releases?

when pressing the full clone>upload to plc then select the file name and press select and yes, the display goes to the Unitronics logo screen for about two seconds, and then just exits back to info mode. never displays any status or anything else on the screen.

I created a .c10 file, file name 12345678, it is located in the System folder, and it still does not clone to the plc. I have tried this on several plc with no luck cloning.

Apologies, the clone is a (.c10) but it still will not clone from the sd card to the plc.

Creating a clone file in Visilogic under Project>create project file>clone file select Visilogic+OS (.c57) which is obviously creating a file for the V570 not the V1040

Just downloaded Visilogic 9.2.0. The new alpha numeric keypad works great. A few things i did notice though is that the alarms and standard numeric keypad entries are still small. Is there some reason these were not "upscaled" the same way. Also the creating a clone file through visilogic does not seem to work.