Jump to content

390186

Members
  • Posts

    2
  • Joined

  • Last visited

Everything posted by 390186

  1. hello, I was able to communicate with the module ex-rc1 when it is disconnected expansion modules, with both usb and rs 232 (or even downloading done on it) the problem is when I connect the modules (2 IO-DI16, IO-5 ATC8). While OPLC with its port I / O Expansions communicates with EX-A2X (2 IO-1 and IO-RO16 AO6X) The problem is on the modules unfortunately the old ex-rc1 and the old V570 gone are the short circuit, very likely connected modules on the ex-rc1 even if the LED flashes will no longer be able to communicate with the new ex-rc1. Now we are providing for the replacement of 2 modules IO-DI16 and 5 modules IO-ATC8 I also tried to connect the module IO AO6X to ex-rc1 without configuring and are unable to communicate via usb rs232 When I installed the new modules will give you results of the operation thanks sorry for my english
  2. Hello, and recently that work on a v570j, I was able to load a saved project, but I can not load the project of ex-rc1 communication failure between PC and ex-rc1. between pc and OPLC via usb no problem of communication. who can help me? Sorry for my english
×
×
  • Create New...