Andrus

Hi ! I tried as R.Moses guided and succeed to install BinLib and Boot Then tried to install OS , but it got error on PC screen during update. Contacted Unitronic Tech support and from there got an extra tip: Try as follow: Turn off the PLC Touch and hold the screen. Power on while screen is touched. You will see a countdown on the PLC screen. Touch the HMI screen twice . The countdown should have stop. On VisiLogic configure the communication settings with a baud rate of 115200 and a timeout of 1 sec First update only the BinLib When BinLib has finished updating, please update only the Boot When Boot has finished updating, update only the O/S. Download a blank project Tried many times to update O/S, but it stopped during install. as last effort I just refrain using computer, went to have dinner and when came back, it was OK

Hi ! looks like something bad happened. Updated SM35-J-T20 system using USB to COM adapter and Visilogic 9.8.9 Had communication with SM35-J-T20 before, but display do not light up after powerdown. How to enter bootstrap mode ? Tried, that power off, wait 10 sconds, then pressed touchscreen and power back. No sucess. Any guidelines ?