Jump to content

2rlp

Members
 View Profile  See their activity

  • Posts

    72

  • Joined

  • Last visited

 Content Type 

Everything posted by 2rlp

  1. 2rlp
    Hi Damian, Thanks for the reply. Yes I will be using a 4 - 20mA to regulate the powder clutch brake. i am not worried about the diameter as i am using a loadcell to check the actual tension in the web. this in turn modifies the brake condition. Ron
  2. 2rlp

    Ascii Strings

    2rlp posted a topic in UniDDE

    Hi, I have tried UniDDE to exchange numeric values between an Excel Sheet & a Vision 130. Can UniDDE be used to exchange Ascii Strings? If yes, then how. Thanks Ron
  3. 2rlp

    WEBINAR - Web Server

    2rlp commented on Jas's blog entry in Webinars Collection

    Thanks Jas.
  4. 2rlp

    WEBINAR - Web Server

    2rlp commented on Jas's blog entry in Webinars Collection

    Hi, How many pages can be created using the simple webserver? Ron
  5. 2rlp
    Hi, I have to control the tension in a Web. We will be using a V130 + LC1 along with a Load cell. What would be the right way to go about this. Should I use a PID to control the the brake on the unwinder? Or is there another way of doing it. I will be using LC1 for the first time. Thanks, Ron
  6. 2rlp
    Hi, As per your HELP Section on TEST Bit, if I need to test bit no. 10 of ML2, then I need to enter a value of 10 in the Offset of the function. However, I find that in order to test bit no. 10 of ML2, I have to enter a value of 22. I am using a V130 on an application where I shift around 200 bits to the right & need to check any bit in the stream. Hence need to enter a variable in the Offset of TEST bit function. Is the HELP wrong, or am I doing something wrong. Ron
  7. 2rlp
    Hi, I am trying a Shift Logic in a V130. I need to TEST bits to enable certain Outputs. The PLC does not behave as per the details in the HELP section. In the help you have shown that in order to check bit 21 of ML2, B will need to be 21. However, in reality, B has to be 10. ??? Is the Help wrong or am I wrong? Ron
  8. 2rlp
    Hi, I have 3 different sensors connected on the COM2 (RS 485) of a V280. These sensors are plug in types. They send their data serially via MODBUS. These sensors are of different makes & have different FIXED Baud Rates. I have utilized 2 inputs to identify these sensors on the PLC. I need the PLC to switch automatically to these Baud Rates on Identifying the sensors. I am not able to do this. Is there any way in which this can be implemented? Thanks Ron
  9. 2rlp
    Thank you very much. All I needed to do was to register it in the Vision Swapper. Ron
  10. 2rlp
    Hi, I am using Win XP SP3. I have just installed V9.0.1. Whenever I try to use it, I get the error as per PDF attached. Thanks for your replies Ron V901.pdf
  11. 2rlp

    Ho Ho Ho

    2rlp replied to Ash Neilson's topic in The Lounge

    "MERRY CHRISTMAS" To All The Members On The Forum. Ron
  12. 2rlp
  13. 2rlp
    Dear Fantasia83, I'm in trouble trying to communicate with my V570 through the com1 port of my new Laptop. In your post you refer to your PCs COM 1 port, but in your image it shows up as COM 5. May be its due to this. I too use Win 7 Ultimate without any problems Ron
  14. 2rlp
    Hi, I am receiving the attached error. Are the umber of Keypad entries with Min/Max Controls limited to 8? Pl reply asap. Thanks Ron U90Error.pdf
  15. 2rlp
    Thank you both Damian & Emil. Ron
  16. 2rlp
    Hi, As attached, I have an application using a V280 & 9 Slave devices. The drawing attached is the exact representation of the system. Kindly advise me as to where are the End Terminating Resistors to be installed? Thanks Ron ModbusTermination.pdf
  17. 2rlp
    Hi, Every time I try to use Create Project Files, I get a message Runtime Error 28... Out of Stack space. I am running Visilogics 8.6.2 on Windows XP SP3. Pl respond Thanks Ron Error.pdf
  18. 2rlp
    Thanks I need it for 1 PLC only. Wil try to play around & see Ron
  19. 2rlp
    Hi, I a using Remote Operator for the first time. Like the feel of it. I would like to know if there is a way to get to display in Full Screen directly on starting it? Thanks Ron
  20. 2rlp
    Thanks Ofir, will try out.
  21. 2rlp
    Hi, Had done a project using V570, due to some reason, the program in the PLC was corrupted??? I need to send the same program on a SD card to the client. I do not have a V570 with me. I do have a few V130s. Now without a PLC, can the program be dowloaded from Visilogic or any other utility onto a SD card? If yes, then HOW? Kindly reply ASAP Ron
  22. 2rlp
    Hi Joe, Not all Serial to USB converters work with Jazz. You will need the Converter specified by Unitronics. With Vision PLCs and even with M90/91, any type of Serial to USB will suffice. Ron
×
×
  • Create New...