Jump to content

Bazel27

Members
  • Posts

    5
  • Joined

  • Last visited

Everything posted by Bazel27

  1. Thanks , i have made an adjust of scalling logic already. Thanks for the fast response. Cheers Aleksei Bagel
  2. Hello , Need some help. I have NTC sensor 10k Ohm at 25 C , connected through the voltage divider to Jazz 10-11-ua24 analog 0-10V input. When divider is not connected to plc , and i measure voltage between R1 and ground it shows 5 V , and then i connect it to the plc , voltage drops to 4V. What is the reason ? i have made a drawing of connection diagram Thanks in advance Bagel NTC calibration.spl7.pdfAleksei
  3. Hello . i have a problem. In my project I I have Jazz T10 and GSM modemEnfora1308 connected to it. So, sms function works beautifully , Plc receiveand send sms. But now , I want to debug program online, so I connect another Enfora1308 modem to the pc , andit initialized. Then I’m trying to connect to the PLC side modem, but message occur that connection timeexpired or time out. As I understand , to receive and send sms , SB181 must be on , and what about online debug through modem. SB 73 must be active ? or I;m doing somethingwrong ? Hope you understand my problem Thx Aleksei
  4. Thanks, alot. I have solved my problem. Thanks to all for replies. Aleksei
  5. Hi I’m trying to programJazz JZ-11-UA24 , and want to activate an analogoutput +10v from controller keypad. I have tried to store a value #8192 into the MI100 which is connected toanalog output, but it doesn’t take any effect. Can anyone show a programexample, for me ? Thanks Aleksei
×
×
  • Create New...