Jump to content

Lauryee

Members
  • Posts

    1
  • Joined

  • Last visited

Everything posted by Lauryee

  1. Hello, What should I know if I want to build in addition to the five v-350 plc-s to rs 485 network.Please correct me if enything is wrong. 1.Need change the positions of the jumpers inside plc-s.First and last plc-s I need to change both termination jumpers OFF to ON and other plc-s (2,3,4) stays OFF. All plc-s network option both jumpers I need move to 485. 2.Need to configured FB-s. Unit ID and com port init. 3.Can I need the specific MJ-10-22-CS66 connectors to the plc-s.ports? 4.Can I use cat 5e (4 twisted pairs) for network wiring max 100m.? And now main question.My first plc is connected by progcable to PC. There is 4 wires pressed in RJ 2,3,4,5 pin. Can I make new 6 pin RJ 11 plug because the 1 and 6 pins goes out to the second plc port for RS 485 network signal? Is that way possible to watch all five plc-s.in remote operator program? Thanks
×
×
  • Create New...