Jump to content

Boetje

Members
  • Posts

    7
  • Joined

  • Last visited

Everything posted by Boetje

  1. Hello everyone I have a challenge that I cannot solve a P1 telegram (ASCII string) is sent from an electricity meter every 7 seconds How can I process this in Unistream And where should I buffer it, this because of over 700 ASCII characters in the telegram must search for the value after a code The telegram is not fixed in length, and line number 42/5000 Below a scan of PuTTY /ISk5\2MT382-1000 1-3:0.2.8(50) 0-0:1.0.0(101209113020W) 0-0:96.1.1(4B384547303034303436333935353037) 1-0:1.8.1(123456.789*kWh) 1-0:1.8.2(123456.789*kWh) 1-0:2.8.1(123456.789*kWh) 1-0:2.8.2(123456.789*kWh) 0-0:96.14.0(0002) 1-0:1.7.0(01.193*kW) 1-0:2.7.0(00.000*kW) 0-0:96.7.21(00004) 0-0:96.7.9(00002) 1-0:99.97.0(2)(0-0:96.7.19)(101208152415W)(0000000240*s)(101208151004W)(0000000301*s) 1-0:32.32.0(00002) 1-0:52.32.0(00001) 1-0:72.32.0(00000) 1-0:32.36.0(00000) 1-0:52.36.0(00003) 1-0:72.36.0(00000) 0-0:96.13.0(303132333435363738393A3B3C3D3E3F303132333435363738393A3B3C3D3E3F303132333435363738393A3B3C 3D3E3F303132333435363738393A3B3C3D3E3F303132333435363738393A3B3C3D3E3F) 1-0:32.7.0(220.1*V) 1-0:52.7.0(220.2*V) 1-0:72.7.0(220.3*V) 1-0:31.7.0(001*A) 1-0:51.7.0(002*A) 1-0:71.7.0(003*A) 1-0:21.7.0(01.111*kW) 1-0:41.7.0(02.222*kW) 1-0:61.7.0(03.333*kW) 1-0:22.7.0(04.444*kW) 1-0:42.7.0(05.555*kW) 1-0:62.7.0(06.666*kW) 0-1:24.1.0(003) 0-1:96.1.0(3232323241424344313233343536373839) 0-1:24.2.1(101209112500W)(12785.123*m3) !EF2F Slimme_meter_15_a727fce1f1.pdf
  2. Hello to all , I'm struggling with reading out a smart power meter I want to use the (float) values of a telegram in a building automation project The data I get through an RS232 card UAC-01RS2 Which are directly linked to the P1 of the Smart Power Meter This is automatically sent every 10 seconds by the Smart Power Meter I read the telegram in the buffer by using the COM Rx function But how do I filter the (float) values out of the telegram Start = / End =! After the! = CRC16 using the polynomial: x16 + x15 + x2 + 1 The telegram scan by PuTTY --------------------------------------------------------------------------------- /KFM5KAIFA-METER 1-3:0.2.8(42) 0-0:1.0.0(180831122702S) 0-0:96.1.1(serial number of the electricity counter 34 ) 1-0:1.8.1(007782.396*kWh) 1-0:1.8.2(020529.570*kWh) 1-0:2.8.1(000000.000*kWh) 1-0:2.8.2(000000.000*kWh) 0-0:96.14.0(0002) 1-0:1.7.0(01.276*kW) 1-0:2.7.0(00.000*kW) 0-0:96.7.21(00010) 0-0:96.7.9(00007) 1-0:99.97.0(2)(0-0:96.7.19)(170211134618W)(0000008681*s)(000101000008W)(2147483647*s) 1-0:32.32.0(00000) 1-0:52.32.0(00000) 1-0:72.32.0(00000) 1-0:32.36.0(00000) 1-0:52.36.0(00000) 1-0:72.36.0(00000) 0-0:96.13.1() 0-0:96.13.0() 1-0:31.7.0(003*A) 1-0:51.7.0(002*A) 1-0:71.7.0(000*A) 1-0:21.7.0(00.699*kW) 1-0:41.7.0(00.486*kW) 1-0:61.7.0(00.089*kW) 1-0:22.7.0(00.000*kW) 1-0:42.7.0(00.000*kW) 1-0:62.7.0(00.000*kW) 0-1:24.1.0(003) 0-1:96.1.0(serial number of the gas counter 34 ) 0-1:24.2.1(180831120000S)(07839.248*m3) !95D2 -------------------------------------------------------------------------------------------------- DSMR v4.0 final P1 bus enengie.pdf
  3. Dear Users Is it possible to visualize the project name on a screen Something like this is also done in the Info menu Info / Version / Software / Project Name So if you use the project name like cola-cola V3.45 So that you can visualize "cola-cola V3.45" on a screen Thanks
  4. Hello My firmware manager of Unilogic cannot find any firmware files He has surging for over 2 hours I already reinstalled Unistream, bud no resold Has Anyone a suggestion, how to solve this problem In need to make a USB stick whit a Upgrade file for my panel Thanks a lot
  5. Hello I have a PLC error on 3 systems V570, What is the corrosion of that I have no Ethernet connection On the eternet page ( info mode ) Below the IP address Critical Error Reset PLC SDW39 1
  6. Hello to all Unitronics fans Is it possible to set a bit by receiving a email Something like te SMS function in jour software shut bee nice in the further Boetje
  7. Hello, There is a sample project available in the new 9.0 version. Where you can copy SD to FTP ( Vision is FTP client ). I also work on a project to save to a NAS. I have configured the NAS as a FTP server. Late me know when it is working, I am out of time to test the hole thing
×
×
  • Create New...