Hi all,
I realise that I can reboot from UniApps but is it possible to do a reboot from Ladder/HMI.
Reason being, my Modbus IP comms (over 3G) seems to get 'bogged down' after a few weeks/months and stops communicating. My golf course customer then angrily complains when his lake overfills because the fill pumps haven't stopped as comms is lost, I then log on and reset it manually from UniApps and away it goes again until next time.
Id like to routinely reboot the PLC to prevent this scenario and also have a button on the HMI for the end user to press if needed rather than calling me.