arbellah

I know I am crazy, but I am not a dropbox user or plan to be. Can you upload the files here?

Can you post your code? Your EXF-RC1s will have there own ladders accordingly.

Correct, I only need this to run once

I was using the links and jump screen, but it was being finicky, so I defaulted back to a transition. I know its not recommended, however it is/was working.

I use a positive or negative transition to launch the subroutine, it resets some MIs and than the last run is to send it back to the home screen. Should I set a bit in the rung above it and than use the positive transition than?

I know exactly what subroutine is causing the crash. The problem is I have the screen call identical to other subroutines that do not have this error. I am calling the HMI jump via ladder instead of Links and Jumps. So I have a reset numerics subroutine and at the very end it jumps back to the startup screen. I call the subroutine in one ladder with no issue. I call it in this certain ladder and recieve this error. Your also correct. Not sure why I was typing MB its 217 KB

I dont know why I was typing MB, It is KB. My bad.

217MB file and I can only upload 48kb so I will have to hope you can direct me where to look without the ladder.

I will have to upload the ladder tomorrow as I do not have enough file size for uploads remaining today.

F. Enum: 0x00001000 Ins. Ptr: 000A77F0 0x0001EF5c Ladder 0x0000003D When I return the the home screen via the info button, it throws this code. The rest of my ladder is functioning correctly, and I use the same call in many different instances. The code is rather ugly, but I would like to get this solved before cleaning it up.

Can you post your code?

Can you post your code?

Download all and burn: backs up the new appication in the PLCs flash memory. Forces the reset after the download. Burn upload project: Enables the entire project to be uploaded from the Vision PLC. Also forces the reset after the download. For what you are trying to do you should be using Download all and burn. Upload should be used to pull the program from the PLC to the computer I believe, I have never used it myself.

Awesome bit of advice. Thank you so much

Should be like this?