TPE

Timers now working as expected after experimenting with a basic timer only program. Thanks again Keith.

Thanks very much Keith. I'll do as you suggest and count from zero up to the desired count and calculate the displayed value. Aaron

Hi All, I have configured input I0 as a high speed counter but the Operand it is connected to counts up. Is it possible to configure the operand to count down ? Thanks in advance Aaron

Hi All, I have a user interface on a V260 with 6 variable length strings (edited by end user). The strings can be up to 15 characters and look fine on the left hand side of the screen next to F1,F2,F3 whatever the length but on the right side of the screen next to F4,F5,F6 the strings look bad if they are less than 15 characters because they are left justified away from the F4,F5,F6 keys. Please see attched file for the basic screen layout (no ladder included). Is there a function to right justify strings or any examples available ? Thanks in advance Aaron Strings.vlp

Thanks Keith, I will try your suggestion. Aaron

Hi All, Are there any example projects for using timers in the V260 please ? The help topic is quite light. I have tried to place a timer element in a ladder and triggered from a function key change but the timer always remains at the preset time of 5 seconds. Thanks in advance

Thankyou very much for your fast response. The example is just what I need. While the user needs to enter a value with 1 decimal place, I may well multiply by 10 and place in an integer counter. Thanks again. TPE

Hi all, Is it possible to implement a floating point data entry field on a Vision260 screen ? I have crated a screen with Numeric Variable data entry field and have set the format to 4.1 but cannot find a way to link the field to an MF (memory float). Thankyou in advance. TPE