Jump to content

mari720413@gmail.com

Members
  • Content Count

    7
  • Joined

  • Last visited

Community Reputation

0 Neutral

About mari720413@gmail.com

  • Rank
    Newbie

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Hello. Yes! Yes! Even those messages modem works on my USP-104-B10. Where can i find more detailed information about sending and receiving SMS except help in unilogic . Do you have some examples of using I/O of modem ,lets say for getting calls.
  2. Hello again. Now I have original Kit. At the end I have this message. What can I do. Best regards
  3. Hello, recently I buy modem CINTERION EHS6T USB. Firmware is 04.013. I have tried to configure modem via VisiLogic and normally it does not happened because firmware has to be 03.001. Unfortunately there is no way to know which firmware will be when you purchase. And usually there are updates for this kind of hardware. Do you have some updates in AT lines for this model? Shall GSM-KIT-16J KIT ,BGS2T be work with USP-104-B10? Thank you in advance.
  4. Hello Dear, I have send my question to support@unitronics.com. Hope you will help me at least by telling me approximate time gap between questioning and having answer. You are selling industrial PLCs, so you know that time matters. And today ....... the very same hardware tells me - look attachment! BR
  5. Hello, It is a system created 5 months ago. A USP-104-B10 with 3 URB-TCP remote adapters located in different places in a plant. Those adapters collect information from machines and displaying on USP. Three days ago i have lost communication between modules. Since then i cannot restore thinks. My structure is Panel IP (192.168.188.88 for example), CPU IP (192.100.100.10 for example) , URB1 IP (192.100.100.100), URB2 IP (192.100.100.101) and URB3 IP (192.100.100.102). Eth. port1 on panel is connected to our network. Eth2. port is connected to Eth1. port on URB1, Eth2. port o
  6. Hello, In a project i have controller model USP-104-B10 connected to Energy meter via Modbus RTU. More of the variables are UINT32. It is simple read UINT32 then swap ABCD_CDAB to get value. Which is the simplest way to read UINT64. Thank you in advance.
×
×
  • Create New...