Jump to content

t0r3r0s

Members
  • Posts

    56
  • Joined

  • Last visited

Everything posted by t0r3r0s

  1. I try it but same problem , on v280 i havnt touch screen ,i try get on tab 6 , and i get same info look photo https://ibb.co/YZgnstG
  2. Greeatings I have vision V280 and I have problem. I do upload program and povver supply in this moment going off , in the middle , vvhen i povver on my vision i havnt anythin on screen , have you some solution ?
  3. I have a v280 unitronics plc, my problem is as follows, I was uploading a program in a PLC and at that moment I loss my electricity. When electricity arrives the screen is blank I can't access anything on the plc u, is there a solution?
  4. Greeatings . I have one problem vvith measuring temperature vvith pt100. I use v1210 and expansion module pt400 , i have pt 100 vvith tvvo pt100 , problem is vvhen i start my inverter temperature value get some crazy value not good , vvhen motor is off temperature is ok . Have someone this problem on this module ? Thank you
  5. I vvork vvith vision 1210 , and I have expansion module like iodi16-to16. On input I52 I 53 I have high speed input. on this input i vvire one pnp or npn sensor ,I have disk vvith 12 pulses per revolution , I need to calculate rpm and this information is feedback for PID.
  6. greeatings . have you some examples , i need to measuring rpm its for me feedback for pid.
  7. Greeatings , I have one problem with u90 leader , I need to mul two number and result is bigger than 32k. After mul this number i need to div , and that is problem i cant get right result. Expmple : MI0 = 1000 MI2= 53 MI4=53000 that is ok , How can i divide MI4 now whit some number example 100 ??? Can someone help me ?
  8. Greeatings . I use Fotek SSR-40 DA this relay have input 3-30VDC , i read all your post and i vvill try vvith pvvm like you say
  9. pid for valves isnt problem i have analog output module , but problem is vvith controling temperature , can you explane me hovv can i use pvvm scan
  10. I know, only digital TO have high speed , only try with examples of kratmel
  11. I use vision V280 for this project , i use IO16DIA3/RO16 , Module for thermocouple , analog output for valves .
  12. i finde controling ssr with pwm , ssr work 0 off 1 on , i cant belive they have module for Thermocouple but not module for controling ssr
  13. Greeathings. I need some help about how control ssr relay with digital inputs . I use ssr relay for control temperature , in FB PID I dont see MB or O . Have some solution about that. Thank you
  14. Greeatings i have problem with read data on xdate. I connect my V700 to xdata but i cant reed my table . In attach you can see photo of xdata. In examples i finde xdata example for v570 i try same code but some register I cant use on V700. Have someone expirience with this .
  15. I see now, thank you for your help now remote operator work , thank you
  16. I have a new problem, I tried with another laptop, to try the remote operator, however the same problem is just that now I can't even load the program over Ethernet. I try with static ip but same problem , i try to change ip but same
  17. Yes I can download with tcp protocol , but i cant connect to remote operator and xdata . I use V700 use socket 0, pot 20256, ip 198.168.1.50 ,
  18. Hi; I have one more problem I cant connect to my remote operator . I have this error . Have you some idea ?
  19. I try it but ,when first time write it is ok , when i change my value of MI it write first value
  20. I try to see what happend , but same problem is with MI ,i set my orginal program photo, and you can see result in datatable, I write water you can see result is SE720
  21. On the photo you can see Proizvod string 10, on the second photo i try with ML to ML and i see first ML is empty if i write example water in datatable I have only r. ML 10 is correct on datatable Proizvod
×
×
  • Create New...