Jump to content

bjarni

Members
  • Posts

    32
  • Joined

  • Last visited

Everything posted by bjarni

  1. Hello again - as said earlier I'm starting up a project with Unistream hooked to an Ex-Rc1 and D16-A3 Thanks to you guys, I've managed to go through the config procedure as described in the training procedure: Configure Ex-Rc1 and the IO unit in Visilogic and export the config to Unilogic Read it by Unilogic and export the in/out files to Visilogic and download it to the Ex-Rc1 Verify that can ID on Unistream is 1 and 2 on the Ex-rc1 (dip on 2 also) . Baudrate 1Mb on both Test the D16-A3 IO from Visilogic - could both see input signals and set output from Visilogic In Unilogic I can see the image of the IO modules and their IO, but if I try to watch an input or set an output - nothing happens on the IO hardware??? Do I need to do something more than the configs, like some CAN send/receive in ladder? Can I see somewhere if the CAN is operating as supposed? Thanks, Bjarni
  2. Hi Alon Avivi, don't know which folders you are referring to. You got some full paths? and should I load the file from there?
  3. Hello, wonder if you have some hint for me. I have a an Unistream with remote IO: Ex-RC1, LC3 and D16A3-R016, all hooked together via CAN bus I followed the config instructions from your training video, starting with an VisiLogic file from your examples. But when I try to load the exported .ulri file in the Ex-RC1 properties window it is like nothing happens, no warning or error messages and the Visilogic File field remains empty ? Thanks, Bjarni
  4. Hello, I'm just starting my first project with UniStream/UniLogic and I have the PLC hooked to a PC via Modbus, PLC as Slave. I haven't found a way to sync the clock in PLC with the PC clock. Is there a way to set the PLC clock via the Modbus ? Thanks, Bjarni
×
×
  • Create New...