[Unistream vs Ex-Rc1 communication]

Hello again - as said earlier I'm starting up a project with Unistream hooked to an Ex-Rc1 and D16-A3  

Thanks to you guys, I've managed to go through the config procedure as described in the training procedure:

• Configure Ex-Rc1  and the IO unit in Visilogic and export the config to Unilogic
• Read it by Unilogic and export the in/out files to Visilogic and download it to the Ex-Rc1
• Verify that can ID on Unistream is 1 and 2 on the Ex-rc1 (dip on 2 also) .  Baudrate 1Mb on both
• Test the D16-A3 IO from Visilogic - could both see input signals and set output from Visilogic
• In Unilogic I can see the image of the IO modules and their IO, but if I try to watch an input or set an output - nothing happens on the IO hardware???

Do I need to do something more than the configs, like some CAN send/receive in ladder?   Can I see somewhere if the CAN is operating as supposed?

 

Thanks,  Bjarni

 

 

 

[Ex-RC1 Harwdare config problems]

Great - thanks.  it works now

 

[Ex-RC1 Harwdare config problems]

Hi Alon Avivi, don't know which folders you are referring to.  You got some full paths?  and should I load the file from there?

[Ex-RC1 Harwdare config problems]

Thanks, I'll just wait.

 

[Ex-RC1 Harwdare config problems]

Hello, wonder if you have some hint for me.  

I have a an Unistream with remote IO: Ex-RC1, LC3 and  D16A3-R016, all hooked together via CAN bus

I followed the config instructions from your training video, starting with an VisiLogic file from your examples.  But when I try to load the exported .ulri file in the Ex-RC1 properties window it is like nothing happens, no warning or error messages and the Visilogic File field remains empty ?

Thanks, Bjarni

 

 

 

[Sync UniStream clock via Modbus]

So easy .  Thanks a lot. 

 

[Sync UniStream clock via Modbus]

Hello,
I'm just starting my first project with UniStream/UniLogic and I have the PLC hooked to a PC via Modbus, PLC as Slave.  I haven't found a way to sync the clock in PLC with the PC clock.  Is there a way to set the PLC clock via the Modbus ?

Thanks,  Bjarni