Tomas

Hello, I try to config remote access to PLC (PC -PLC connection) US5-B10-T42 vai internet. I have already activated the connection via the Internet for VNC via port 5900 protokol TCP/UDP. Port forwarding is configured on the router. It is OK and working. But I can't get the PLC dowload and online to work. I set the ports (forwarding port) according to the manual 22 and 3335. Unfortunately, I could not connect. It writes "ping to device wasnt succesfull" Could you give me an advice please.. Thank you UPDATE It is my mistake (I forwarding port to "CPU Ethernet" IP). Port 22,335,8001 have to forwarding to "Panel Ethernet" IP.

Is there somewhere to find the caller ID on the modem? I have Unistrem U5 with comuniation card UAC-CX-01RS2 (RS232) conet with modem BGS2T I supouse it like in Visilogic Last call Thank you

Hello, I have the same problem. Did you find some solution? Thank you

Thank you for your time. I had the same idea. And I tried it but not function (because there is HW switch on board). B.R.

Thank you for your answer. B.R.

My configuration, v430-J-T38, I have already installed additional port ethernet (for remote connection). 1 Port RS485 I use for communication by Modbud with electricity meters. It's my problem that I don't have another port to use as RS232. I guess it has no solution? Thank you

Thank you for your answer. I am not sure if I catch your idea. My problem is I have v430 with 1 port 485 (already used). I need send SMS." it is not possible to select RS485 in Visilogic modem settings" - I supose I can not use RS485 for GSM in Visilogic and libraries.

Hello, I would like to ask you for help with connecting the GSM module Cinterion BGS2T via RS485 (modbus). Does anyone have experience example of how to connect GSM SMS sending via RS485 not RS232. Thank you Tomas