Kevin L
-
Posts
14 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Downloads
Articles
Media Demo
Everything posted by Kevin L
-
The actuators are indeed quadrature feedback You've reinforced my thinking the UID-0808THS module is the one I purchased a few of the opto isolator converters from the link below, initial bench testing is promising Just need to work out how to write the subroutine now - every day's a school day! https://www.amazon.com/Converter-Optocoupler-Isolator-Maluokasa-DST-1R4P-N/dp/B07NNLYWCB Thanks for your help again Joe
-
I'm using a USP 10.4, and i'd like to add a module to control the position of linear actuators The Hall sensors in the actuators are 0-5V, and the count frequency will be high, as there are dozens of pulses per millimetre of travel Any thoughts on which module to use?
-
Cannot load project to controller due to unknown error
Kevin L replied to Kevin L's topic in UniLogic Software
Overcame the problem by removing the SD card and downloading the files directly to it on my laptop -
I am trying to replace a PDF file with an edited update of the same document but, no matter what I try, a message window appears with "cannot load project to controller due to unknown error" I have even tried a PDF file totally blank, other than the word "test", no joy Strangely, I can replace the file with another that has already been downloaded I'm mystified!
-
It's a bit sparse, I find I learn so much more from the tutorials and webinars
-
Does anyone know of a Unilogic CAN sniffer tutorial? If not, is there a possibility Unitronics could do one?
-
Different network Doh!
-
I can connect to my panel on my laptop, no problem (using TightVNC), but not having any success with Android Apps 9two different apps on two different devices) Returns a connection timed out each time Any thoughts?
-
Bloody missed it😡 Is there somewhere i can get it?
-
Spot on Joe! Cheers, and stay safe
-
Thanks for this Joe, I can set an alarm as such, but when the alarm "goes off", I want to be able to reset it as you would an alarm clock. I.e. Alarm acknowledged, silenced, and reset until the next event
-
Inputting a set time hh.mm UniStream to Visi
Kevin L replied to sasdiscos's topic in UniLogic Software
I have this issue too..... Anyone? -
Is there a way to utilize the RTC to create a daily alarm clock function?
-
Is it possible to supress the alarm green button if all is well and no alarm condition is present? (When the Alarm banner runs at full size, it minimizes to a small green button when no Alarms are active. When an Alarm becomes active, the banner resumes its full size)