Jump to content

El Buga

Members
 View Profile  See their activity

  • Posts

    9

  • Joined

  • Last visited

 Content Type 

Everything posted by El Buga

  1. El Buga
    didn't work, actually i changed de input to ohms and nothing, same error
  2. El Buga
    and yes, i replaced the green connector
  3. El Buga
    how can i reset the PLC? i found switch to factory boot in visilogic but the PLC screen just turned red
  4. El Buga
    yes is a 3 wires PT100, two of them to 7 and 8 inputs and common to 4
  5. El Buga
    i replaced the IO board and doesn't work, i have 4 PT100 and doesn't work with any , i just hace one connected with the PLC but i changed the PT100 input and was the same prpblem :c
  6. El Buga
    the wires and jumpers are well connected, what could be wrong with the PLC?
  7. El Buga
    i measured the PT100 (connected in the plc) and marks 110 ohms, it can be a continuity problem in the connections ports?
  8. El Buga
    The value is 32767, but doesn't have sense because the other PT100 port have the same value (not used), l think plc is not reading PT100 ohms, but again, with other PLC, the same program and PT100 it does
  9. El Buga
    Hi, i have a PT100 and it was working normally, but yesterday i turned off the PLC and when i turned on agan the display in the HMI (variable,numeric) did not showed me numers, just "**.*", i thought the wires were disconected or something but no, i tried with another plc (are the same, SM35-J-RA22) and it works, with the same PT100 and program, i don't know what i have to do, sorry for my english xD
×
×
  • Create New...