Jump to content

alekspc

Members
  • Posts

    8
  • Joined

  • Last visited

Everything posted by alekspc

  1. I found HMI>Font-Handler where I can set different fonts. Also There I can change keyboard to cyrrilic (russian) type. But it doesn't work for cyrrilic. I see start or other unreadable characters instead of words I don't know what to do. I have russian localization of windows 10.
  2. Hello to all, I want to build few HMI screens using SM35-J-R20 (Samba) PLC and Visilogic V9.8.91 (Downloaded from official cyte). But I found that I don't have fonts with Russian/Ukrainian laguage letters. It's very bad because U90 has such possibility. How can I turn on Russian fonts or dofnload rusification to visilogic?
  3. OK, I uploaded program succesfully, thanks for your answers. Problem was in setting additional settings, except baudreate (check bit, stop bit and parity).
  4. A little remark, I have COM1 settings of PLC: 115200, 8,n,1. Does it mean : 8 bit, check bit : note stop bit: 1?
  5. As for Samba PLC, I succesfully updatet boot loader but afte 10-th tries. And now I can't only update O/S of PLC. PLC use COM port speed 11520 baud/sec, does it's possible to decrease this value with some additional software? I thinks problem could be in this.
  6. I have USB-to-COM cable with ch340 chip. Samba PLC doesn't have any other ports, except that for it's original cable. I want to replace old Jazz PLC JZ20-J-R16-Y with Samba PLC. I also failed even to connect to Jazz to upload program from. I used U90 ladder software. May be problem in my OS Windows 10.
  7. I try to use unitronics at first time. I want to try to write test project with 2 timers (TD and TA) to controller. When I downloaded program, I got messege that I need to update OS, from help I got steps how to do it. But I have error when I update program. Before update I had such version of PLC Afte update (that was not finished) I got such error I had many tries with maximum wait for connection. I use cable MJ10-22-CS25 with another use-to-com converter on Noutbook with windows 10. Currently it seems that controller is unworkable.
×
×
  • Create New...