Jump to content

Davi Grossi

Members
  • Posts

    2
  • Joined

  • Last visited

Davi Grossi's Achievements

Newbie

Newbie (1/4)

0

Reputation

  1. Ah, that was indeed the case. It's been a while since my last Visilogic project, so I didn't recognize the force indication. It's pretty weird, though, as the program uploaded in is fresh (hasn't been uploaded to any PLCs yet) and the V350 was recently factory reset, but oh well. Tyvm Flex!
  2. Hello everyone! I'm currently working on a new project with a V350-TR34 and it's been giving me some issues to get going. It's a relatively old PLC we had lying around (I estimate between 4~6 years of no use) that we're currently resurrecting. On startup, it presented a black screen and beeped frequently, which was solved by rebooting the OS through visilogic. Now that it's working properly, after transferring a program, we're met with another issue regarding the inputs. Most of them currently display, during online test, "0 <0>" as their value and can't be changed within our panel/circuits. We have only 2 available inputs that properly show just "0" and can be physically changed to 1. I've tried searching the forums or the web for a solution, but I'm at a loss here. I suspect it has something to do with this particular PLC needing the OS reboot, but I haven't faced this issue in any of the previous V350s I've used in the last 4 years. Does anyone have a clue about what's going on? Thanks!
×
×
  • Create New...