Angie alvarado
-
Posts
3 -
Joined
-
Last visited
Angie alvarado's Achievements
Newbie (1/4)
0
Reputation
-
place the resistance but the motor does not turn, the drive does not set any alarm, only the motor does not turn. connect a led and in this if the pulses are reflected.
-
I am wanting to control this servodrive with the v350 plc version, its output is correct, but when connecting it to the servodrive pulses the motor does not turn, if I connect the oscilloscope it turns but it stays turning, how can I solve this?
I attach some images in the drive link.
https://drive.google.com/drive/folders/1ff34_CrZ-hKc5mq57GYRFSE2Ge9B5K48?usp=sharing
I would greatly appreciate your suggestions. ☺️
Silvia Ávila
-
I am wanting to control this servodrive with the v350 plc version, its output is correct, but when connecting it to the servodrive pulses the motor does not turn, if I connect the oscilloscope it turns but it stays turning, how can I solve this?
I attach some images in the drive link.
https://drive.google.com/drive/folders/1ff34_CrZ-hKc5mq57GYRFSE2Ge9B5K48?usp=sharing
I would greatly appreciate your suggestions. ☺️
Silvia Ávila
-
I am wanting to control this servodrive with the v350 plc version, its output is correct, but when connecting it to the servodrive pulses the motor does not turn, if I connect the oscilloscope it turns but it stays turning, how can I solve this? I attach some images in the drive link. https://drive.google.com/drive/folders/1ff34_CrZ-hKc5mq57GYRFSE2Ge9B5K48?usp=sharing I would greatly appreciate your suggestions. ☺️ Silvia Ávila
-
Angie alvarado joined the community
-
Tengo el mismo problema, me conecto con un cable usb a serial, tengo w10 y la versión del visio es 9.8.91