Jump to content

Angie alvarado

Members
  • Posts

    3
  • Joined

  • Last visited

Everything posted by Angie alvarado

  1. place the resistance but the motor does not turn, the drive does not set any alarm, only the motor does not turn. connect a led and in this if the pulses are reflected.
  2. I am wanting to control this servodrive with the v350 plc version, its output is correct, but when connecting it to the servodrive pulses the motor does not turn, if I connect the oscilloscope it turns but it stays turning, how can I solve this?

     

    I attach some images in the drive link.

    https://drive.google.com/drive/folders/1ff34_CrZ-hKc5mq57GYRFSE2Ge9B5K48?usp=sharing

     

    I would greatly appreciate your suggestions. ☺️

     

    Silvia Ávila

  3. I am wanting to control this servodrive with the v350 plc version, its output is correct, but when connecting it to the servodrive pulses the motor does not turn, if I connect the oscilloscope it turns but it stays turning, how can I solve this?

     

    I attach some images in the drive link.

    https://drive.google.com/drive/folders/1ff34_CrZ-hKc5mq57GYRFSE2Ge9B5K48?usp=sharing

     

    I would greatly appreciate your suggestions. ☺️

     

    Silvia Ávila

  4. I am wanting to control this servodrive with the v350 plc version, its output is correct, but when connecting it to the servodrive pulses the motor does not turn, if I connect the oscilloscope it turns but it stays turning, how can I solve this? I attach some images in the drive link. https://drive.google.com/drive/folders/1ff34_CrZ-hKc5mq57GYRFSE2Ge9B5K48?usp=sharing I would greatly appreciate your suggestions. ☺️ Silvia Ávila
  5. Tengo el mismo problema, me conecto con un cable usb a serial, tengo w10 y la versión del visio es 9.8.91
×
×
  • Create New...