[UniLogic ver .1.33.236 Download problem]

Hi, all

After latest updates of UniLogic we have found problems with downloading a project to PLC (USC-x5-TA30)

Mainly after downloading project by botton "download"  at top bar sometimes  coil or variabels are staying set even  the condition are not meet. ( this is not overwriteing problem od coils and variabels  it has been checked)

Downloading  by button "Download all"  helps but it is takeing ages and sometimes after reset PLC comes in error state (red led on PLC is flashing) and we have to power PLC off  and on.

This issue we have found on two PLC controlers ,also we have tried use difrent  laptops WINDOWS 10.

Any one have or had this problem to ?

[Synchronizing two motors]

There is  i chance to get  this  functions bit  earlier  for tests ? It would be helpful  

[Synchronizing two motors]

Hi.

I am starting with unitronics PLC's and i have to  make at new project  with   two servo working where one is a master and other one slave , Foil is pulled by rollers through machine and salve servo needs to follow master +keep spare amout of foil in hanging loop.

 

Thanks for help.