Hello,
I have a problem getting a pt-100 3 wire sensor to work with my unitronics plc V350-35-TU24. Despite all of my efforts, it still shows the value 32767.
Here is my setup right now:
This is how the jumper settings should look like for pt-100: https://imgur.com/a/Q73WbcY
Here is how they are on my plc: https://imgur.com/a/HAhDQpk
This is how the pt-100 wire connection should look like: https://imgur.com/a/e55mO8O
And the connection on my plc: https://imgur.com/a/vpn97Ld
The software configurations look like this: https://imgur.com/a/EjbkioB
And after downloading it to the plc, the online test shows the error value: https://imgur.com/a/SZrL3Eq
I have also tried other wire connections like this one: https://imgur.com/a/6LuGb8q
But this one also shows the same error value.
The pt-100 sensor also works perfectly fine: https://imgur.com/a/6FzEM5d
Is there something I'm missing? What should I try to get it to work?
Thank you in advance.