Jump to content

Jefferson

Members
  • Posts

    5
  • Joined

  • Last visited

Everything posted by Jefferson

  1. Hello good afternoon I have a problem, we make the connection of the encoder and it is working fine, it adds on one side and subtracts on the other, it is correct. but I have a difficulty, when I configure an output with the degrees of the encoder as in figure 1 between 90 and 180, it works correctly, or in a range between 1 and 359 degrees it works perfectly. If I have to configure an output like example two between 280 and 50 degrees, where the output has to go through the value of zero, I don't know what tool to use so that the output works in these ranges without a problem. could you help me?
  2. Hello Kratmel, thank you very much for all your help, it worked correctly, it's perfect now
  3. Thank you very much for your help, it helped me, but now I have a problem, the encoder counts if I turn it clockwise, and if I turn it anti-clockwise it counts, do you know how to make it count in one direction
  4. Hello good morning,, I am using an incremental encoder, using a fast input, the reading is configured and it is doing it correctly, but I need that when the power is lost or the machine is turned off, the value of the current reading is not erased, I would like to know What tool can I use to make this happen?
×
×
  • Create New...