Jump to content

der_bruchpilot

Members
  • Posts

    3
  • Joined

  • Last visited

Everything posted by der_bruchpilot

  1. Those who can read have a clear advantage. That was the problem. I only saw the software-parameters and diddn't realize, that there olso some hardware jumpers. Thank you very much.
  2. enclosed the datasheet from the PT1000 with 4-20 mA converter. The signal-generator, which I used, I have tested with a Multimeter. TA-GA_2020.pdf
  3. I have also problems with the analog inputs of a V350-35-R34. At first I took a PT1000 probe with 4-20 mA converter with 2-wire-connection. Nothing happend and I thought it was about a too low voltage to drive the converter. So then I used a adjustable signal generator with externel power supply. That generater works proper fine without the PLC. With the PLC there are running only 3.2 to 3.5 mA. What is my problem? Perhaps sombody can help me. Thanks in advance
×
×
  • Create New...